Skip to content
English - Australia
  • There are no suggestions because the search field is empty.

EasySetup Crown

Here is how to get through the last few months without the CRM!

Melbourne

1. Download easySetupCrownMelbourne.zip (File stored in Ops IMS shared drive)

2. Refer to the other Crown Melbourne instruction set to get the IP address of the unit being replaced (For this example use 1.2.3.4) and the Parent it connects to (For this example 5.6.7.8)

2. Open the zip file and open options.php

3. Change `$gatewayIP = "172.23.4.1";` to be a different IP to the IP of the unit where the first 3 numbers are the same then the last one is 1 - Eg 1.2.3.4 becomes 1.2.3.1

4. Change `$dbAddress = "172.16.12.190";` to be the Parent as listed in the solutions table

5. Copy this zip file onto a USB drive

6. Insert the USB drive into the IST then power on the IST

7. Press control alt F1 to get into a terminal session and login

8. Run the command sudo easySetup /media/ /easySetupCrownMelbourne.zip

( means keep pressing the tab key to auto populate the path)

9. Follow the easySetup prompts & reboot

When prompted for the unit ID enter the ID of the faulty unit this one will be replacing

10. Refer to other Crown Melbourne guide for details about configuration

 

Perth

1. Download easySetupCrownPerth.zip from the IMS

2. Copy this zip file onto a USB drive

3. Insert the USB drive into the IST then power on the IST

4. Press control alt F1 to get into a terminal session and login

5. Run the command sudo easySetup /media/ /easySetupCrownPerth.zip

( means keep pressing the tab key to auto populate the path)

6. Follow the easySetup prompts & reboot

When prompted for the unit ID enter the ID of the faulty unit this one will be replacing